CTS Declares Quarterly Dividend


Reading time ( words)

The Board of Directors of CTS Corporation (NYSE: CTS) announced the fourth quarter dividend of $0.04 per share, payable January 29, 2016, to shareholders of record at the close of business on December 18, 2015.

About CTS

CTS (NYSE: CTS) is a leading designer and manufacturer of sensors, actuators and electronic components to OEMs in the aerospace, communications, defense, industrial, information technology, medical, and transportation markets. CTS manufactures products in North America, Europe and Asia.

Share

Print


Suggested Items

Practical Verification of Void Reduction Method for BTC Using Exposed Via-in-pad

12/16/2019 | Alfredo Garcia, et al, Sanmina and Nokia
The method explored in this article regards the use of exposed via-in-pad. A dedicated test vehicle was designed for two types of QFN components. The main variables accounted for were the component size, number of exposed vias in the thermal pad, via pitch, via size, and solder paste coverage. The responses sought in this experiment include a thermal pad void level and solder wicking down the via barrel with resulting solder protrusion on the opposite side of the PCB.

Dispensing EMI Shielding Materials: An Alternative to Sputtering

08/23/2019 | Garrett Wong, Nordson Asymtek and Jinu Choi, Henkel Electronic Materials Llc
Shielding electronic systems against EMI has become a hot topic. Technological advancements toward 5G standards, wireless charging of mobile electronics, in-package antenna integration, and SiP adoption are driving the need to apply more effective EMI shielding and isolation to component packages and larger modules. For conformal shielding, EMI shielding materials for exterior package surfaces have mostly been applied with a PVD process of sputtering, leveraging front-end packaging technologies to back-end packaging applications.

The Role of Parylene Conformal Coatings in Next-gen Electronics

08/19/2019 | Tim Seifert, Specialty Coating Systems
Designers and manufacturers of electronics are under pressure to make packages smaller, lighter, and more environmentally friendly, while ensuring that their new technologies perform reliably in their operating environments. This article takes a closer look at Parylene conformal coatings and the role they can play in helping manufacturers address current and future challenges in the electronics industry.



Copyright © 2020 I-Connect007. All rights reserved.