SMTA International 2015 Best Papers Announced


Reading time ( words)

The SMTA is pleased to announce the Best Papers from SMTA International 2015. As speakers at SMTA International, individuals make contributions to the industry by sharing their research and findings.  To reward exceptional achievement, $1,000 awards and plaques are given for the Best of Conference Presentation, Best of Proceedings Paper, and the Best International Paper.

The winner from SMTA International 2015 for the Rich Freiberger Best of Conference Award, as selected by the conference attendees, is Bob Willis, bobwillisonline.com, for his presentation entitled "Assembly Process and Product Failures-Causes and Cures." The award is based on the conference attendees' rating of each speaker at the technical session. Bob donated half of his prize to the Charles Hutchins Educational Grant.

Paul Vianco, Ph.D. from Sandia National Labs won the Best of Proceedings category for the paper "Establishing a Ti-Cu-Pt-Au Thin Film on Low Temperature Co-Fired Ceramic (LTCC) Technology for High-Temperature Electronics." Co-authors include J. Rejent, M. Grazier, A. Kilgo, B. McKenzie and A. Allen, Sandia National Laboratories; E. Guerrero and W. Price, Honeywell Inc.

Matt Kelly, P. Eng., MBA, IBM Corporation, won the Best International Paper category for his paper entitled "Via-In-Pad Plated Over (VIPPO) Design Considerations for Enterprise Server and Storage Hardware." Co-authors include Mark Jeanson, Timothy Younger, Jim Bielick, Theron Lewis, and Mitch Ferrill, IBM Corporation. This award and the Best of Proceedings are selected by the SMTA International Technical Committee.

A new award category, Best Student Presentation, was awarded to Cong Zhao, Auburn University, for his paper “Long Term Aging Effects on the Reliability of Lead Free Solder Joints in Ball Grid Array Packages with Various Pitch Sizes and Ball Alignments.” Co-authors include Chaobo Shen, Zhou Hai, Jiawei Zhang, M. J. Bozack, and J. L. Evans, Center for Advanced Vehicle and Extreme Environment Electronics (CAVE3), Auburn University.

The authors will formally be presented their awards at the Opening Ceremony during SMTA International on September 27, 2016 in Rosemont, Illinois.  For information on participating in the 2016 SMTA International Conference, visit the Call for Papers page.  Abstracts can be uploaded directly on-line and will be accepted through February 29, 2016.

The papers are available in the conference proceedings available in the SMTA Bookstore.

For more information on SMTA International please contact SMTA Administrator Tanya Martin: tanya@smta.org or 952-920-7682 or click here.

About SMTA

The SMTA membership is an international network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies, including microsystems, emerging technologies, and related business operations.

Share

Print


Suggested Items

Comparing Soldering Results of ENIG and EPIG Post-steam Exposure

09/11/2019 | Jon Bengston and Richard DePoto, Uyemura International USA
Electroless nickel immersion gold (ENIG) is now a well-regarded finish used to enhance and preserve the solderability of copper circuits. Electroless palladium immersion gold (EPIG), meanwhile, is a new surface finish also for enhancing and preserving solderability—but with the advantage of eliminating electroless nickel from the deposit layer. This feature has become increasingly important with the increasing use of high-frequency PCB designs whereby nickel’s magnetic properties are detrimental.

Solder Mask Evolves into a Truly Additive Process

09/09/2019 | John Fix, Taiyo America Inc.
The 5G era is creating quite a bit of work for many PCB engineers as the materials required to keep up with the speed, frequency, and latency requirements need to be defined and qualified. Solder mask, for example, now becomes a truly additive process. Read on to find out how and why.

Selecting the Proper Flex Coverlayer Material

09/06/2019 | Dave Lackey, American Standard Circuits
Coverlayers are polymer materials used to cover and protect the copper traces of the flex circuit product. There are a number of different options available for protecting the circuits, and they serve different design requirements in terms of cost, performance, and flexural endurance optimization. When specifying the choice, it is critical to call out not just the type of coverlayer material but also the thickness requirement. This can be very important in certain types of constructions, especially when a flex circuit will experience dynamic flexing during use.



Copyright © 2019 I-Connect007. All rights reserved.