Seika Machinery Now Carries the Malcom SWB-2 Automatic Wetting Balance Tester


Reading time ( words)

Seika Machinery Inc., a provider of advanced machinery, materials and engineering services, is pleased to introduce the Malcom SWB-2 Automatic Wetting Balance Tester. The automated solution has been designed for measuring the wetting force of your through-hole components using wave solder.

The SWB-2 is a wetting balance tester for through-hole component leads. Quickly evaluate the wettability of your component, flux, and solder. The system complies with ANSI J-STD-003, MIL-STD 883, ISO 9455-16 and JIS Z 3198.

Among its features and benefits are easy to change flux and solder; computer control auto measurement analyzing test data; on-site testing done in under one hour; and easy-to-use analysis software.

About Seika Machinery, Inc.

Seika Machinery, Inc. (SMI) is a subsidiary of Seika Corporation, Japan and member of the Mitsubishi Global Group. SMI provides electronics manufacturers with advanced machinery, superior materials and engineering services.

Share

Print


Suggested Items

Solder Paste Printing From the Stencil’s Perspective

02/19/2020 | I-Connect007 Editorial Team
Jeff Schake of ASM Assembly Systems discusses the complications surrounding printing and solder paste that he sees from his perspective as a stencil expert.

Blackfox Trains Veterans for Good Manufacturing Jobs

02/18/2020 | Real Time with...IPC
Blackfox Training Institute has been training manufacturing technologists for over 20 years. Based in Longmont, Colorado, Blackfox is now focused on helping veterans of our armed services transition into good jobs in the manufacturing sector. During IPC APEX EXPO 2020, Editor Nolan Johnson spoke with Blackfox CEO Al Dill about the company's veteran training programs, and how this effort is helping companies fill jobs that might otherwise go unfilled.

Solder in PCBA: Can’t Live Without It... or Can We?

02/17/2020 | Joe Fjelstad, Verdant Electronics
For most of its historical use in electronics, the solder alloy of choice was tin-lead, either an Sn60/Pb40 alloy or the Sn63/ Pb37 eutectic version of the tin-lead alloy. These two alloys were the workhorses of the industry. They were both well understood in terms of their processing and reliability—that is, until the advent of lead-free, a well-meaning but ill-conceived and poorly executed conversion, forced on the industry by the European Union in 2006.



Copyright © 2020 I-Connect007. All rights reserved.