Rocket EMS Purchases Fortus 3D Production System from Stratasys


Reading time ( words)

Rocket EMS Inc., a Silicon Valley-based full-service EMS supplier, announces the purchase of the Fortus 3D Production System, a 3D printer that allows prototype design parts to be created faster and at a lower cost compared to traditional machining, resulting in more design iterations and a more refined end product.

According to Spencer Hall, Rocket EMS’s Business Development Manager, the company purchased the printer to expand its capabilities. “For line production, the Fortus 3D Production System will allow our fixtures to be designed and produced in-house, reducing tooling costs and lead times.”

He added that as an additional benefit, Rocket EMS now will be able to offer prototype design/production services. “Along with building the PCB, we will be able to build the housing that the PCB will be installed into,” Hall said. “The prototyping business can be extended to customers outside the PCBA industry, thus increasing our customer base significantly.” Rocket EMS’s ability to build their customers’ PCB housings will translate into reduced lead times since they no longer have to ship from two different vendors, and also will save cost due to the reduced tooling costs.

The Fortus® 3D Production System from Stratasys® is designed with flexibility to meet the user’s needs, whether it’s adopting digital manufacturing for the first time or getting high-performance materials and high capacity for demanding production environments. The latest Fortus 3D Production System boasts faster print times and improvements in the user interface. That ultimately means they’re easier to use and increase productivity even further than previous models.

Fortus systems run on FDM® technology, which builds parts layer by layer from a CAD model using a variety of production-grade thermoplastics. With FDM technology, the traditional fabrication process is substantially simplified. Toolmaking becomes less expensive and time consuming. Intricate designs that are impossible to make with conventional tooling are now possible. As a result, manufacturers realize immediate improvements in productivity, efficiency and quality. FDM technology also allows users to choose from a wide range of production-grade thermoplastics, each with specific qualities to meet individual manufacturing needs.

Hall added that one of the available thermoplastics is Ultem 1010, which is a high-strength, high-heat material that is food-contact and bio-compatibility certified, chemical resistant, and ideal for aerospace and under-the-hood automotive applications.  

He concluded that while the system can print quickly, speed is not actually a good measurement of printer performance. It is a byproduct of quality: a very precise part will require a slow print; however, a rough shape (no small details) will print quickly. Rocket EMS appreciates that the Fortus 3D Production System has four resolutions to choose from to reach the best quality/speed combination for its specific, individual needs.

About Rocket EMS Inc.

Rocket EMS is a Santa Clara, Calif.-based full-service EMS supplier providing a broad range of services including PCB layout, supply chain management, assembly, test, system build and logistics across a broad range of market segments. Rocket addresses quick-turn NPI support through domestic volume production. The company is comprised of a group of dedicated long-term employees using state-of-the-art tools and equipment led by a management team with a track record of success in the EMS business.

Share

Print


Suggested Items

Process Ionic Contamination Test (PICT) Standard Roundtable With Industry Experts

04/22/2020 | I-Connect007
With standards committees set to release the first of four new test standards, industry experts discussed the process ionic contamination test (PICT) standard, which was recently approved by the IEC for publication. Roundtable participants included Teresa Rowe, senior director of assembly and standards technology at IPC, Graham Naisbitt, chairman and CEO of Gen3, Jason Keeping, corporate process development at Celestica, and Doug Pauls, principal materials and process engineer at Collins Aerospace.

SMTA Europe’s Electronics in Harsh Environments Conference and Exhibition: A Taste of Things to Come

04/14/2020 | Pete Starkey, I-Connect007
SMTA Europe’s Electronics in Harsh Environments Conference has become a must-attend annual event; unfortunately, it also became another casualty of the COVID-19 lockdown. Scheduled to take place in Amsterdam, the Netherlands, from April 21–23, 2020, it has now been postponed until December 1–3. Pete Starkey reports on a preview seminar presented by SMTA Europe.

This Month in SMT007 Magazine: Exclusive Interview With Burt Rutan, Aerospace Legend

04/03/2020 | I-Connect007 Editorial Team
If you follow advancements in aerospace technologies and expeditions, then you know the name Burt Rutan. Described by Newsweek as “the man responsible for more innovations in modern aviation than any living engineer,” Rutan is a bold visionary with a passion for the advancement of technology, who has designed 46 aircraft throughout his career. Following his IPC APEX EXPO keynote presentation, Rutan stopped by the I-Connect007 booth and shared his thoughts on a wide variety of topics.



Copyright © 2020 I-Connect007. All rights reserved.