CTS Declares Quarterly Dividend


Reading time ( words)

The Board of Directors of CTS Corporation announced the third quarter dividend of $0.04 per share, payable October 28, 2016, to shareholders of record at the close of business on September 23, 2016.

About CTS

CTS is a leading designer and manufacturer of sensors, actuators and electronic components to OEMs in the aerospace, communications, defense, industrial, information technology, medical and transportation markets. CTS manufactures products in North America, Europe and Asia.

Share

Print


Suggested Items

Dispensing EMI Shielding Materials: An Alternative to Sputtering

08/23/2019 | Garrett Wong, Nordson Asymtek and Jinu Choi, Henkel Electronic Materials Llc
Shielding electronic systems against EMI has become a hot topic. Technological advancements toward 5G standards, wireless charging of mobile electronics, in-package antenna integration, and SiP adoption are driving the need to apply more effective EMI shielding and isolation to component packages and larger modules. For conformal shielding, EMI shielding materials for exterior package surfaces have mostly been applied with a PVD process of sputtering, leveraging front-end packaging technologies to back-end packaging applications.

The Role of Parylene Conformal Coatings in Next-gen Electronics

08/19/2019 | Tim Seifert, Specialty Coating Systems
Designers and manufacturers of electronics are under pressure to make packages smaller, lighter, and more environmentally friendly, while ensuring that their new technologies perform reliably in their operating environments. This article takes a closer look at Parylene conformal coatings and the role they can play in helping manufacturers address current and future challenges in the electronics industry.

Surface Treatment Enabling Low-Temperature Soldering to Aluminum

07/15/2019 | Divyakant Kadiwala, Averatek Corporation
An increasingly popular method to meet the need for lower cost circuitry is the use of aluminum on polyester (Al-PET) substrates. This material is gaining popularity and has found wide use in RFID tags, low-cost LED lighting, and other single-layer circuits. However, both aluminum and PET have their own constraints and require special processing to make finished circuits.



Copyright © 2019 I-Connect007. All rights reserved.