Lost your password?
Not a member?
Resend confirmation instructions
Sort By Category
- New Technology
- New Products
- Test & Inspection
- Breaking News
- IPC Standards
- Rework & Repair
- From The Show
This Month in SMT007 Magazine—IBM: Supply Chain Blockchain
08/04/2020 | Nolan Johnson, I-Connect007
Handling Supply Chain Disruption in Silicon Valley
07/15/2020 | Nolan Johnson, I-Connect007
I-Connect007 Leadership Survey: Valuable Lessons From Grandma
07/10/2020 | I-Connect007 Research Team
Navigating the Current Supply Chain
07/08/2020 | Nolan Johnson, PCB007
Catching Up With Fane Friberg: Supply Chain Management Expert
07/03/2020 | Dan Beaulieu, D.B. Management Group
SMT :: From The Show
Cimetrix Helping to Digitize Factories
Dan Feinberg met with Cimetrix’s Ranjan Chatterjee to discuss how their new Sapience software allows factories to establish communication with a wide variety of equipment across multiple lines and multiple facilities across the whole industry.
Industry Outlook With Siemens’ Fram Akiki
In this video interview from the show, Editor Dan Feinberg speaks with Fram Akiki, VP of electronic and semiconductor industries for Siemens, about the biggest challenges in the electronics industry. They also discuss major industry trends, including smart connected devices used in autonomous transportation and robotics, increased complexity, and a reduced time to market.
BGA Standard Update With Ray Prasad
In this video interview from the show, Ray Prasad, president of Ray Prasad Consultancy Group, updates Guest Editor Joe Fjelstad on the ongoing work with the BGA standard and the latest revision that is going to ballot.
This Month in SMT007 Magazine: Business Practices Drive the Smart Factory, Not the Other Way Around (Part 1)
In Part 1 of this conversation, Sagi Reuven— business development manager at Mentor, a Siemens Business—makes the case that smart factory implementations must start with traditional process analysis and improvement before the data capture process is useful. He also covers how sometimes the key to utilizing Industry 4.0 comes from a change in mindset rather than a drastic change or investment in new equipment or processes.
Watch It! The Perils of Technology Transfer (Selective Spray vs. Selective Dip Application)
The tenth episode of the popular micro webinar series “Coatings Uncoated!” is now available to view. Author of The Printed Circuit Assembler’s Guide to...Conformal Coatings for Harsh Environments and topic expert Phil Kinner from Electrolube shares highly focused educational information on conformal coating and encapsulation. If you are in the assembly business, an EMS company, or responsible for specifying conformal coating and/or encapsulation, then this free series is for you.
IPC APEX EXPO 2020 Attendees Speak: Travis Smith and Mindy Sanchez
"I’m seeing a lot of great manufacturers and different equipment that’s available in the market, as well as new, emerging technologies," said Travis Smith of Ball Aerospace. "I’m learning a lot more about some of IPC’s standards and committees as well. It has been a fantastic week of educating ourselves for manufacturing processes going forward. And the IPC booth has a wealth of information."
Oren Manor: Mentor Leading Way for Industry 4.0
In this video interview from the show, Guest Editor Steve Williams talks with Oren Manor—director of business development at Mentor, a Siemens Business—about Industry 4.0, robotics, and other applications. They also addressed integration of Mentor's CAD/CAM solutions with Siemens' mechanical offerings.
Watch & Learn! Latest Installment of I-007 Micro Webinar Series Covers UL Approvals: Aerosol Spray Technology
The eighth episode of the popular webinar series “Coatings Uncoated!” is now available to view. In this segment, viewers will learn about a customer application involving aerosol spray coating. The customer reported failures due to arcing, creepage, and corrosion. Kinner explains the relevance of UL approvals and progresses through the details of the case study.
IPC APEX EXPO 2020 Attendees Speak: Mike Montesi
"One of the biggest challenges for me selling is educating customers that they can generate oxygen and nitrogen on their own for up to 90% savings versus getting trucked in deliveries," said Mike Montesi of On Site Gas Systems. "It’s all about education because 98–99% of customers are used to the high cost of delivered gases, where we can separate it on-site with their own equipment, and the payback is typically under a year."
Solder in PCBA: Can’t Live Without It... or Can We?
For most of its historical use in electronics, the solder alloy of choice was tin-lead, either an Sn60/Pb40 alloy or the Sn63/ Pb37 eutectic version of the tin-lead alloy. These two alloys were the workhorses of the industry. They were both well understood in terms of their processing and reliability—that is, until the advent of lead-free, a well-meaning but ill-conceived and poorly executed conversion, forced on the industry by the European Union in 2006.
Manncorp: An SMT One-Stop Shop
In this interview, Joe Fjelstad speaks with Ed Stone, sales manager of Manncorp. Ed details the operations at Manncorp’s two locations in San Diego and Philadelphia, including production of LEDs for Manncorp’s daughter companies. As Ed says, describing the steady traffic at his booth, “We have something that everyone at the show needs.”
Watch and Learn: Not All Acrylics Are Created Equally
How can additional data, including test results, ensure a greater understanding of the most suitable coating for your application? The fifth episode of the popular webinar series, "Coatings Uncoated," is now available to view. Author of "The Printed Circuit Assembler’s Guide to Conformal Coatings for Harsh Environments" and topic expert Phil Kinner from Electrolube shares highly focused educational information on conformal coating and encapsulation.
I-007e Micro Webinars Releases Part 4 in ‘Coatings Uncoated!’ Series
What is creepage, and how does it impact clearance? Can conformal coatings reduce creepage? The fourth episode of the popular webinar series, Coatings Uncoated, is now available to view. Author of The Printed Circuit Assembler’s Guide to Conformal Coatings for Harsh Environments and topic expert Phil Kinner from Electrolube shares highly focused educational information on conformal coating and encapsulation.
Market Insights From Epoch International’s President
Epoch International is an EMS company specializing in front-end engineering. Barry Matties speaks with Epoch President Foad Ghalili at productronica 2019 about the company’s ability to maintain little employee turnover, challenges they’re facing, and expected growth in the U.S. market.
Risk Mitigation: An Essential Guide
Risk mitigation in the global supply chain is nothing new to many industries. What is new, however, is the exponential rise in potential risks and the reality that those are risks that simply cannot be predicted. What are some factors for a winning strategy that might not immediately come to mind? Here are a few essential recommendations to the global PCB industry that might significantly lower the risk impact on a company’s productivity, time to market, and financial success.
I-007e Micro Webinars Releases Part 3 in ‘Coatings Uncoated!’ Series
Have you ever wondered about the process of corrosion and the formation of tin whiskers? The third episode of the popular webinar series, "Coatings Uncoated," is now available to view. Author of "The Printed Circuit Assembler’s Guide to Conformal Coatings for Harsh Environments" and topic expert Phil Kinner from Electrolube shares highly focused educational information on conformal coating and encapsulation.
Upgrading to a Digital Line
Ridhi Kantelal of Arch Systems breaks down what fabricators considering bringing in digitalization and upgrading their lines should know, and why they may see the most benefit from focusing on the data engineering aspect rather than the actual retrofitting of their systems.
Engaging STEM Students at IPC APEX EXPO 2020
At this year’s IPC APEX EXPO, you’re likely to see quite a few high school students moving amongst all the normal show activities thanks to the IPC APEX EXPO STEM Outreach Program. Launched two years ago at IPC APEX EXPO 2018, the 2020 version of the STEM Outreach Program will be larger and more immersive than ever before.
What You Need to Know About the Digital Factory
Barry Matties spoke with Oren Manor, director of business development for Mentor, A Siemens Business, during productronica about the many benefits of a digital factory and what’s keeping companies from becoming one. Oren also gives examples of big data analytics along with the move to a lot size of one.
PCB Repair: Thoughtful Best Practices
Barry Matties recently spoke with Curtis Smith of Huntron about the critical factors that somebody needs to understand about the plant maintenance regarding the PCB repair process. The PCB repair process is not just a matter of just getting the equipment anymore but finding the right people with a troubleshooting mindset that can do it. A failed PCB can bring down an entire manufacturing line, and companies need to be able to repair the board and keep their manufacturing going.
Is Captive Making a Comeback?
Andy Shaughnessy recently spoke with Altium’s Steve Chalgren, senior VP of business strategy and planning. Steve shared his thoughts about why improved manufacturing and automated EMS equipment, such as robotics, might lead smaller OEMs to become captive shops like the old days. Is captive making a comeback?
Accurate, Uniform Data With KIC’s Smart Reflow Analyzer
Editor Nolan Johnson and Miles discuss KIC’s newest system, the SRA, a smart reflow analyzer that can provide the customer with information about their machines: Is the airflow adequate? Is there proper heat transfer to the product? Is this data uniform from week to week and month to month? Miles explains how the SRA uses the latest in laser technology to track conveyor speed and heat transfer more accurately than ever.
BTU Discusses its Next-generation Flux Management System
At productronica 2019, Nolan Johnson spoke with Peter Franklin, managing director of BTU Europe, about BTU’s next-generation solder reflow flux management system—Aqua Scrub. A winner of the show’s Global Technology Award for Soldering, Peter breaks down the specifics of what makes Aqua Scrub such an intriguing technology.
A Walking Tour of Mycronic Equipment at productronica 2019
I-Connect007 pays a visit to the Mycronic booth at productronica 2019 in Munich, and Jeff Leal, product manager for Mysmart, takes us on a walking tour of just one of the lines on display at the show. Jeff takes us through a series of dispensing and conformal coating machines.
Practical Verification of Void Reduction Method for BTC Using Exposed Via-in-pad
The method explored in this article regards the use of exposed via-in-pad. A dedicated test vehicle was designed for two types of QFN components. The main variables accounted for were the component size, number of exposed vias in the thermal pad, via pitch, via size, and solder paste coverage. The responses sought in this experiment include a thermal pad void level and solder wicking down the via barrel with resulting solder protrusion on the opposite side of the PCB.
SEMI Discusses Benefits of SMT-ELS Protocol
Editor Nolan Johnson and Tom Salmon discuss the SMT- ELS protocol, which is being developed collaboratively as a replacement for SMEMA. Salmon overviews the technology involved and industry acceptance so far. He also explains SEMI’s focus on information and control standards, including the newest solution which allows companies to perform switchovers much faster, thanks to the TCP/IP protocol. This platform also works with traditional PLC systems, shrinking development time from one month to several days.
Supply Chain Update and the Impact of 5G
I caught up with Stephanie Martin, senior VP of global supply at Vexos, to talk about the current landscape of the industry from an EMS perspective. Stephanie describes an ongoing technology shift occurring with the industry’s move to smaller case sizes and why it’s in the customer’s best interest to look at the design cycle and go as small as they can on components.
The Digital Medical Revolution
Zulki Khan, founder and CEO of NexLogic Technologies Inc., offers his unique perspective on manufacturing trends as a PCB turnkey solutions provider based in Silicon Valley. He discusses additional requirements that are now necessary to compete in different industry sectors, most notably medical, which he says is set for a “digital revolution.”
Oren Manor on the Siemens-Mentor Integration
In this video interview, part of the productronica coverage, the I-Connect007 team speaks with Oren Manor, director of business development for Siemens, in the Siemens booth. Oren introduces us to the in-booth production equipment that integrates factory automation, motion controls, and MES solutions. He points out that the recent effort to automate SMT lines is now expanding into the areas of final assembly, box build, and manual assembly as well.
Merger and Acquisition Trends
In this interview with the I-Connect007 Editorial Team, Green Circuits’ Joe O’Neil breaks down the current merger and acquisition (M&A) market in the electronics manufacturing space and the industry trends that affect it. Joe also gives his advice on best practices for the negotiating table from both the buyer’s or seller’s perspective.
SMTAI 2019: Carmichael Gugliotti Discusses His First SMTAI Paper
Carmichael Gugliotti, process specialist at MacDermid Alpha Electronics Solutions, discusses his first STMAI paper presentation with Andy Shaughnessy. Gugliotti's paper focuses on periodic pulse plating of mid-aspect ratio PCBs.
SMTAI 2019: SAFI-Tech's No-Heat SAC305—A Possible Gamechanger
Ian Tevis is CTO and founder of SAFI-Tech, a startup focusing on SMT solutions. He explains how he founded SAFI-Tech right after college and details the benefits of the company's first product, No-Heat SAC305.
SMTAI 2019: MIRTEC's Newest Product Introduced at SMTAI
Brian D'Amico, MIRTEC president, updates Nolan Johnson on the healthy business environment on the show floor and the company's new product that was introduced at SMTAI. D'Amico also shares his view on industry challenges providing connectivity for smart factory productivity.
SMTAI 2019: KIC's New, Smart Factory Products
MB Allen, manager of applications and sales for KIC, and Karl Pfluke, regional sales manager, update Nolan Johnson on their new product announcement from earlier this year. They also address the company's ongoing work on smart factory products.
Chuck Bauer: SMTAI 2019 Founder's Award Recipient
At the recent SMTAI conference and exhibition, Chuck Bauer, Ph.D., senior managing director at TechLead Corporation, received the Founder's Award, a prestigious award given to a member who has made exceptional contributions to the industry and provided ongoing support and service to the SMTA.
SMTAI 2019: Chris Bastecki on Low-temperature Solder Challenges and Products
Chris Bastecki, director of global PCB assembly at Indium Corporation, discussed challenges of low-temperature solder and the company's new product, Durafuse LT, which provides novel properties and reliability.
SMTAI 2019: Company Updates and Future J-STD-001 Changes
Nolan Johnson speaks with Graham Naisbitt, chairman and CEO of Gen3 Systems, and Andy Naisbitt, operations director, about how they just signed an agreement with a new distributor. Graham also discussed upcoming J-STD-001 changes and Gen3's shift to a more consultative customer model.
SMTAI 2019: Creative Electron's Mobile X-ray Van and LED-specialized Equipment
Nolan Johnson and CEO Bill Cardoso discuss Creative Electron's new equipment that specializes in LED applications and the company's X-ray van—the "mobile trade show" and demo platform.
Real Time with... SMTAI 2019 Video Interviews
The SMTA International Conference and Exhibition 2019, which took place September 22–26, 2019, at the Donald E. Stephens Convention Center in Rosemont, Illinois, concluded successfully. For those of you who were not able to make it to the show, catch our video interviews with the movers and shakers of the electronics industry. We've updated our video presentation for a better experience for our users, so check it out!
SMTAI 2019: Juan Arango Discusses Koh Young America's New Headquarters
Andy Shaughnessy speaks with Juan Arango, managing director of Koh Young America, about their new corporate headquarters in Atlanta, Georgia, which is located near most of their U.S. customer base.
SMTAI 2019: Nir Benson Discusses Mentor's Challenges and Solutions
Nir Benson, business development manager at Mentor, a Siemens Business, talks with Andy Shaughnessy about his work to integrate the two companies' solutions, some of the challenges he sees, and his efforts to optimize their cloud-based systems.
SMTAI 2019: Kristen Mattson on the SMTAI Vacuum Reflow Systems Demo
Kristen Mattson, marketing principal at BTU International Inc., and Nolan Johnson discuss the vacuum reflow demo that's running on the show floor and the program with the American Competitiveness Institute where they have PYRAMAX vacuum reflow systems available for customer process evaluation.
SMTAI 2019: Tom Forsythe on Cleaning Challenges and Solutions
Andy Shaughnessy speaks with Tom Forsythe, KYZEN executive VP, about the challenges created by continually increasing densities as well as some of the company's newest cleaning solutions.
Real Time with… SMTAI 2019 Slideshow
The SMTA International 2019 Conference and Exhibition closed last week on a high note. For those who were not able to attend the event, held at Stephens Convention Center in Rosemont, Illinois, the slideshow contains a selection of photos from the exhibition show floor as well as the conference.
SMTAI 2019: Lenora Clark Discusses Company Changes and Her New Role
Lenora Clark, director of autonomous driving and safety technology at MacDermid Alpha Electronics Solutions (and co-organizer for the upcoming SMTA Additive Electronics Conference), and Nolan Johnson discuss her new role, recent company reorganization, and the synergies customers are seeing.
SMTAI 2019: Gary Tanel Provides an SMTA Update
SMTA Ambassador Gary Tanel gives Andy Shaughnessy an update on his work with Electronics Alliance and the Dallas chapter of SMTA. He also discusses the JoAnn Stromberg Student Leader Scholarship Award and the Charles Hutchins Educational Grant.
Real Time with... SMTAI 2019 Videos Now Live
If you couldn't make it to SMTAI 2019, be sure to catch I-Connect007’s video interviews with the movers and shakers of the electronics industry. We’ve updated our video presentation for a better experience for our users, so check it out!
RTW IPC APEX EXPO: IPC Global Government Relations Initiatives and Updates
IPC VP of Global Government Relations Chris Mitchell discusses with Judy Warner the association’s initiatives such as the IPC Workforce Champions, the skills gap analysis, and how IPC plans to advocate for the industry and grow the supply chain in North America and around the world.
IPC Validation Services: New Programs and Updates
At the recent IPC APEX EXPO 2019 show, Randy Cherry, director of IPC Validation Services, gives Judy Warner an overview of a new IPC-1791 QML program focused on prime contractors and OEMs, and provides updates on existing programs.
RTW IPC APEX EXPO 2019: iNEMI on Next-generation Soldering
Grace O’Malley, VP of technical operations at iNEMI, and Editor Nolan Johnson discuss the next-generation soldering buzz session workshop hosted by iNEMI at IPC APEX EXPO 2019 and the upcoming bi-annual technology roadmap that will be released this spring.
RTW IPC APEX EXPO 2019: Aculon on Technology Developments and Partnership with Henkel
Aculon CEO Edward Hughes and Editor Pete Starkey discuss surface modification technologies based on nanochemistry. Of particular interest to electronics technologists are recent developments in waterproofing treatments for assemblies, and how Aculon's strategic partnership with Henkel opens up new opportunities.
RTW IPC APEX EXPO 2019: Reducing Voiding in Reflow Soldering
Chris Nash, product manager for PCB assembly solder paste at Indium Corporation, speaks with Kelly Dack and highlights Indium’s take on three important aspects of reliability: thermal, mechanical, and electrical. He talks about challenges of all three aspects, which include solder voiding, and how Indium helps the industry address these issues through its solder paste formulations.
RTW IPC APEX EXPO 2019: Thermaltronics Discusses New Soldering Robot
Michael Gouldsmith, director of Thermaltronics, speaks with Editor Dan Feinberg about their new TMT-9800S robotic soldering unit. He also talks about an inline robotic soldering system—the next stage of their product development—which is scheduled to be released in the middle of the year.
Accelerating and Disrupting Innovation: The Tesla Story
The time was right for Tesla to bring new thinking into the concept of electric transportation when the company observed the quantum shift in battery technology from lead-acid to lithium-ion that had been driven by developments in portable consumer electronics.
Two Full CFX Demo Lines at IPC APEX EXPO 2019
During IPC APEX EXPO, Editor Dan Feinberg spoke with David Bergman, IPC VP of standards and technology, about CFX, IPC’s Connected Factory Exchange software for machine-to-machine communication. With more than companies now supporting CFX, IPC set up two full lines for demonstration at the show.
RTW IPC APEX EXPO 2019: MIRTEC Discusses Automation, CFX, and Sales Success
MIRTEC President Brian D'Amico speaks with I-Connect007 Guest Editor Dan Beaulieu about automation, the Connected Factory Exchange (CFX) standard, and their banner year last year. He speaks about Industry 4.0, automating the inspection process, and collecting more data to help refine the manufacturing process.
RTW IPC APEX EXPO 2019: BTU Discusses New Solder Flux Reclamation Solutions
Bob Bouchard, corporate marketing manager at BTU International Inc., updates I-Connect007 Managing Editor Nolan Johnson on new solder flux reclamation solutions and details the new aqueous scrub methodologies, their increased ROI and efficiencies, and reduced maintenance.
Executive Forum on Advancing Automotive Electronics
Presented by IPC Hall of Fame Council, the Executive Form on Advancing Automotive Electronics, which aims to provide information on the complete supply chain for automotive electronics, featured 10 presentations on all facets of automotive electronics from materials, fabrication, and reliability testing to market information and future needs.
RTW IPC APEX EXPO 2019: Manncorp Highlights Custom SMT Lines
Ed Stone, sales manager for Manncorp Inc., sits down with I-Connect007 Guest Editor Dan Beaulieu and discusses how they are helping customers with low- to medium-volume type production needs by installing custom SMT lines within 48 hours.
RTW IPC APEX EXPO 2019: LPKF on Benefits of Laser Depaneling
Laser technology marches on, and marching along with it is LPKF's new line of laser depaneling equipment. Stephan Schmidt, president, talks with I-Connect007 Guest Editor Kelly Dack about the many benefits of using lasers including cleanliness and higher yields through increased array density.
RTW IPC APEX EXPO 2019: Lenthor Discusses Facility Expansion and New Equipment
Rich Clemente, general manager of Lenthor Engineering, discusses with Dan Feinberg, I-Connect007 Guest Editor, the company’s expansion and new facility and equipment. He also talks about his outlook for the electronics manufacturing industry in North America.
RTW IPC APEX EXPO 2019: MacDermid Alpha Highlights Solutions to Combat Voids in Solder
Joe Fjelstad speaks with Paul Salerno, global portfolio manager at MacDermid Alpha Electronics Solutions, about their latest product and process solutions to combat voids in solder including modifications in pastes, preforms, and vacuum assist soldering.
RTW IPC APEX EXPO 2019: Enabling Complete Automation for Customers
Steve Williams and Saki CEO Norihiro Koike discuss Saki's AOI equipment and complete solution for electronic manufacturers, the industry-leading accuracy of their 3D equipment, and their recent Panasonic IoT certification to provide process data back to the pick-and-place equipment.
RTW IPC APEX EXPO 2019: Panasonic Highlights New Products, IPC STEM Student Outreach Program
Sean M. Murray, GM of North American Sales EAG Group for Panasonic, and Nolan Johnson, I-Connect007 Managing Editor, discuss two new product announcements at the show—PanaCIM process tracker software and MPM-WX—and being a sponsor for the IPC STEM Student Outreach Program.
RTW IPC APEX EXPO 2019: ASM Updates Mid-Level Machines
ASM CEO Americas Jeffery L. Timms and Technica President and CEO Frank Medina give Nolan Johnson a product update on ASM's mid-speed machines—EbySIPLACE and EbyDEK. By bringing key features from ASM's high-end products to their new mid-level models, ASM's new machines are gaining attention Timms and Medina discuss the how and why.
RTW IPC APEX EXPO 2019: KYZEN Intros New Aquanox Aqueous Cleaner
In an interview with I-Connect007 Technical Editor Pete Starkey, KYZEN Executive VP Thomas M. Forsythe introduces the latest member of the Aquanox family of aqueous cleaners and comments on issues of compatibility, rinsability, and consistency of operation.
RTW IPC APEX EXPO 2019: KIC Speaks on Data, Voiding and Traceability
Bjorn Dahle, president of KIC, talks with I-Connect007 Technical Editor Pete Starkey about how the industry has shifted its focus from the machine to data; the issue on voiding and how manufacturers can address this process challenge; and traceability.
RTW IPC APEX EXPO: OK International Soldering Robot Integrates CV Technology
Bryan Gass, vice president at OK International, talks with I-Connect007 Managing Editor Nolan Johnson about their new soldering robot that integrates their Connection Validation (CV) technology. Launched at the IPC APEX EXPO last year, the CV technology provided the company a springboard to have a good start into 2018, and to achieve growth throughout the year.
Day One, Nothing but Fun: The Show Warms Up
The first official day of the IPC APEX EXPO 2019 was full of excitement, activity and business getting done. From the exuberant crowd at the ribbon cutting ceremony, to the closing moments of day number one, the show floor was bustling. Spirits were high from both attendees and exhibitors, sending the signal that optimism and business strength are still the industry mood.
RTW IPC APEX EXPO 2019: MacDermid Alpha Discusses New Materials to Improve Void Issues
Traian Cucu, Ph.D., G.A.T.E Group Leader at MacDermid Alpha Electronics Solutions, discusses with I-Connect007 Managing Editor Nolan Johnson some of the methods to reduce, or eliminate, the solder voiding issue, especially with the continuing trend towards lower-pitch, high-density components.
IPC Conferences Set the Tone for Innovation During IPC APEX EXPO 2019
Monday's docket of sessions at IPC APEX EXPO 2019 presented a wide-ranging array of topics, including the Automotive Executive Forum, the Connected Factory Initiative Workgroup mapping out the future of CFX, the DFX committee celebrating the release of the IPC 2231 Guidelines document, and the Critical Components Traceability Workgroup addressing the creation of a secure supply chain.
SMTAI 2018 Closes on a High Note
SMTA International 2018, which took place in Rosemont, Illinois is now in the history books. This multi-day event, held October 14-18, at the Donald E. Stephens Convention Center, was packed with keynotes, conferences, lively discussions, committee meetings and a two-day exhibition.
Global Impact on European PCB Fabrication: EIPC Summer Conference 2017, Day 1
Electronics industry professionals from 13 countries, mainly from Europe and Scandinavia, others from the USA, but some from as far away as India and Japan, gathered in Meriden, the centre of England, for the EIPC Summer Conference.
RTW NEPCON CHINA: Mycronic Meets High-volume Demand with Solder Jet Printing
Mycronic VP for Global Dispensing and Managing Director Clemens Jargon discusses how the flexibility of solder jet printing helps reduce downtime in the line, thus increasing total line speed and enabling it to keep up with high-volume demand.
RTW NEPCON China: Viscom Talks 3D AOI Developments
Guido Bornemann, head of sales for Asia at Viscom, speaks with I-Connect007 Editor Stephen Las Marias about inspection challenges such as false calls and improving first pass yields. He also talks about the latest developments in 3D AOI to address these issues as well as test strategies to achieve zero defects.
Weiner’s World – March 2017
The CPCA show held at the China International PCB And Assembly Show was moderately busy even though the new venue was not quite ready (no escalators, the "water closets" not fully finished, the heat was only on for a few hours one day). It showcased products for PCB Manufacturing, Electronic Assembly Materials and Manufacturing Services.
RTW IPC APEX EXPO: The Power of Synergies with MacDermid Enthone and Alpha Assembly Solutions
Don Cullen, global director of marketing communications with MacDermid Enthone, and Tom Hunsinger, VP global marketing with Alpha Assembly Solutions explain the structure of MacDermid Performance Solutions, which combines the former MacDermid, Enthone and Alpha Assembly Materials businesses to provide PCB and EMS industries with enhanced innovation and service throughout the supply chain, with unified sales strategies and improved processes.
Super Dry Discusses Tower System Developments
Rich Heimsch, director of the Americas for Super Dry-Totech, sits with I-Connect007's Andy Shaughnessy during the recent IPC APEX EXPO in Las Vegas to discuss the latest product developments at his company, as well as opportunities they are looking at.
K&S and Assembléon: A Perfect Marriage of Technology and Services
Jeroen de Groot and Chan Pin Chong of Kulicke & Soffa talk about the company's acquisition of Assembléon and its benefits to their customers. They also discuss the latest innovations happening at the company's product lines and key trends driving their product development strategies.
Nordson EFD Discusses Dispensing Technologies, Solder Reliability and Innovation
Philippe Mysson, business development manager for solder paste at Nordson EFD, discusses a host of solder-related issues, including reliability, the benefits of solder paste dispensing systems, challenges facing their customers and how Nordson EFD is helping to address those issues, and finally, latest trends driving innovation in solder alloys.
Industry 4.0: Creating a Standard
Mentor Graphics Valor Division's Dan Hoz, general manager, and Ofer Lavi Ben David, product line director, discuss where Industry 4.0 is taking the industry, and the changes it will bring to both large and small companies, customers, and the supply chain, including how Mentor connects different machines on the shop floor to provide universal Industry 4.0 visibility.
Kester Highlights Strategies to Address High-Reliability Issues
Lynnette Colby, global product manager at Kester, discusses the biggest challenge their customers are facing—high reliability—and how using materials other than halogen can help address this issue. She also talks about how a complete solder solution—including the paste, flux and wire—help ensure the reliability of the electronics assembly.
The Key to Understanding Industry 4.0: Show, Don’t Tell!
At the recent productronica event in Germany, Mentor Graphics set up a racecar track in their booth. In an interview with I-Connect007, Michael Ford, senior marketing development manager at Mentor's Valor Division, explains why it's a perfect analogy for understanding Industry 4.0.
Saki Takes 3D Inspection to the Next Level
Eddie Ichiyama, general manager of Saki Europe GmbH and Saki Prague, discusses Saki's new 3D AOI and X-ray inspection equipment, the global inspection marketplace, and the move to reduce or eliminate the human interface. He also talked about their R&D center in the Czech Republic and its activities in the region.
AIM Solder Talks Innovations to Address Assembly, Reliability Issues
David Suraski, executive vice president at AIM Solder's assembly materials division, sat down with us at productronica 2015 to discuss the latest industry trends and customer challenges facing the solder industry, and innovations that are helping customers address their issues. Suraski also talked about reliability issues, and how the company is addressing them.
Electrolube Discusses Conformal Coating Innovations
At productronica 2015, SMT007 editor, Stephen Las Marias, interviewed Phil Kinner, technical director of Electrolube's Coatings Division, about the latest conformal coating challenges being faced by their customers, and how they are addressing these issues. He also talked about the trends driving product innovation strategies at Electrolube, and some of the new solutions they are offering the market.
Press Release Tips
Copyright © 2020 I-Connect007. All rights reserved.